Yacht Club de Tahiti, Marina Taina, Moorea, Taravao,
Call us: +689 87 70 36 15
Close
BP 3691 98713 Papeete Polynésie française
+689 87 70 36 15
44 feet wooden cutter 1988

44-feet WOODEN CUTTER  1988

85.000 €

General characteristics :

  • Length : 13,66 m
  • Width (beam): 4 m
  • Draft: 2m
  • Material :
  • Displacement (lightship, load) : 10,6 tons light ship / 11,2 tons loaded with half tanks
  • Type of rigging: cutter
  • Engine: Engine Beta Marine (Kubota base) 43 HP, new in 2021, 75 hours as of 10-26.
  • Propellor Max Prop, 2 bladed, 20 inch dia
  • Conventional shaft (32mm) with stuffing box and greaser
  • Flag: Great Britain
  • Papeetized
  • Current location : Mo’orea

A UNIQUE CUSTOM-BUILT OFFSHORE SAILING YACHT

This distinctive custom-designed offshore sailing yacht was cold-moulded in laminated wood and launched in 1988. Built by her current owners in collaboration with Tony Farrow and John Chambers of AP Farrow Boatbuilders, Grimsby, England, she was designed by Rupert Lyle, qualified naval architect and principal of Lyle Design.

Conceived as a capable ocean-going yacht offering both performance and comfortable liveaboard accommodation, she combines robust construction with an efficient hull design. Particular attention was given to minimising drag and maximising sailing performance, especially in light winds. Her eight flush through-hull fittings, including the depth and speed transducer, and her two-bladed feathering Max-Prop further contribute to reduced resistance under sail while ensuring good manoeuvrability under power, both ahead and astern.

Built to undertake serious offshore passages without compromising on construction quality, she has an impressive sailing history. Since her launch, she has crossed the Atlantic five times and completed several voyages to the South Pacific, sailing via Panama, California, Mexico and Easter Island. These passages have consistently been undertaken with a crew of just two, demonstrating her seaworthiness, efficiency and suitability for short-handed ocean sailing.

Her maiden voyage took her from England to Gibraltar, through the Bay of Biscay and around Cape Finisterre, before continuing across the Mediterranean to the southern coast of Turkey.

A well-proven ocean-going yacht, combining bespoke naval architecture, traditional cold-moulded construction and a remarkable offshore track record. She represents an interesting opportunity for sailors seeking a distinctive, capable and genuinely ocean-tested vessel.

Further Technical Details

Comprehensive technical information regarding the yacht’s construction is available upon request, including detailed specifications of the cold-moulded hull and deck construction, structural reinforcements, materials and epoxy systems, keel design and attachment, and deck fitting installations.

Amenities

Sleeping accommodation: 2 permanent berths in the owner’s cabin, plus 2 additional berths in the saloon (one to port and one to starboard).

INTERIOR LAYOUT & ACCOMMODATION

Starting forward, the yacht features a large storage compartment in the forepeak, providing ample space for sails, ropes, various equipment and a freezer.

Aft of the forepeak is a spacious and welcoming saloon, combining a warm, comfortable atmosphere with practical features designed specifically for offshore sailing. Both port and starboard settees have generously sized seats and are fitted with lee cloths, ensuring a secure and comfortable position during watches, even in challenging sea conditions.

On the aft starboard side, a substantial chart table provides a dedicated navigation and working area. Reflecting the owners’ years of traditional celestial navigation and paper chart work, this space has been thoughtfully designed down to the smallest detail, offering a highly functional environment for passage planning and navigation.

Further aft on the starboard side is a large bathroom.

To port, aft of the saloon, lies a spacious and well-appointed galley, offering excellent working space and practical storage.

Accessed through the aft section of the galley is a generous double cabin, providing comfortable accommodation for the owners.

The engine is located beneath the companionway steps and benefits from three separate access points, allowing for easy inspection and maintenance. As the owners have primarily sailed rather than motored, the engine was installed in 2021 and has accumulated only 75 running hours.

Construction, history and structural design

Professionally engineered cold-moulded wooden construction, featuring a 37 mm laminated hull made of Sitka spruce, Western Red Cedar and mahogany, reinforced by laminated ring frames and a substantial longitudinal structural framework.

The deck is built using a marine-grade plywood and end-grain balsa sandwich, with solid timber reinforcements at key structural points and deck fittings. Both hull and deck are sheathed in fibreglass and protected with multiple coats of West System epoxy.

The 4,250 kg lead keel features a NACA 63-009 profile and is secured by 13 substantial 25 mm bolts, integrated into the hull’s structural framework using an engineered epoxy-potted fastening system.

Built using high-quality Bruynzeel marine plywood and approximately 500 litres of West System epoxy throughout the hull, deck and interior, this construction reflects a particularly thorough approach to strength, durability and offshore reliability.

Rigging

  • Age: Replaced in 2016.
  • Details: 316 stainless steel 1×19 wire, 10 mm diameter, except lower shrouds in 10 mm compact strand.
  • Terminations: Swaged upper terminals installed by Sailing Services (Miami, FL) using a rotary hammer; Stay-Lok terminals fitted at the lower ends by the owner.
  • Running backstays: 6 mm Dyneema.
  • Standing backstay: Hydraulic adjustment system with Lewmar hydraulic ram.
  • Turnbuckles and toggles: Lewmar silicon bronze.
  • Mast: Custom-built by Atlantic Spars, UK
  • Year: Original mast, repainted in 2016.
  • Material: Aluminium.
  • Configuration: Tapered masthead section, keel-stepped.
  • Spreaders: Upper and lower spreaders.
  • Additional fittings: Intermediate shroud tangs, baby stay tang, inner forestay tang and staysail halyard sheave, running backstay tangs.
  • Mast equipment: Two genoa and mainsail sheaves, two spinnaker blocks, masthead tricolour and anchor lights, VHF/AIS antenna and B&G wind indicator wand.
  • Spinnaker pole: Mast-mounted stowage system with track and roller-bearing car, pole heel lift and lowering lines, and topping lift.
  • Rigid Boom vang
  • Gooseneck: Custom-built.
  • Equipment: Four rope clutches mounted underneath the boom for reefing lines, Cunningham and vang downhaul. Two integral sheaves for reefing lines and two additional sheaves at the boom end.
  • Additional mast track for slides-on attachment of a trysail. 
  • Custom spinnaker pole with dedicated mast track and roller-bearing car, pole heel lift, lowering lines and topping lift. Repainted in 2016.

SAILS

  • Mainsail: Hydranet fabric, radial cut with full length top batten, 3 additional tapered battens. 2 deep
  • reefs reducing area by 25% and 50%. Shelf foot with outhaul. Low friction rings at leach, dog bones at
  • luff with large Wichard hooks at goose neck. “Over the top” leach line. Like new. Made by Quantum
  • Sails
  • Staysail: Cross cut by Doyle Sails. Good condition
  • Genoa: Radial cut by Doyle Sails. Very good condition
  • Asymetrical Spinnaker: Tri radial cut by Doyle sails with ATM sock. Very good condition.
  • Storm Staysail: Crosscut by Relling Sails (UK).
  • Storm Trysail: Crosscut by Relling Sails. Trysail has its own track on mast. Can be stored in bag
  • loaded on track at foot of mast for offshore passages.
  • Genoa furler: Schaefer 3100 roller furling system.

WINCHES

  • Lewmar 40 winches for mainsail, staysail and genoa halyards, reefing lines, Cunningham and vang.
  • Deck winches:
  • 2 x Lewmar 46  ST– Staysail sheets.
  • 2 x Lewmar 55 ST – Genoa sheets.
  • 2 x Lewmar 40 ST – Running backstays and mainsheet.
  • 1 x Lewmar 30 ST – Genoa furling line.

Propulsion

  • Engine Beta Marine (Kubota base) 43 HP, new in 2021, 75 hours as of 10-26.
  • Propellor Max Prop, 2 bladed, 20 inch dia
  • Conventional shaft (32mm) with stuffing box and greaser.
  • Tank capacity: 200 liters in 2 tanks

Mooring

  • Chain; 10mm x 75m, good condition
  • Main Anchor: 30kg genuine Bruce
  • Windlass: Lofrans Tigres
  • Additional Anchors: Fortress FX44, 45lb genuine CQR, 20lb High Tensile Danforth
  • Cordage: 2x 150 ft 18mm multiplat mooring lines
  • Spare hallyards and sheets
  • Numerous spare lines, 10 to 14mm

Comfort

  • 2 Freshwater tanks total 475L
  • Sink, no. of basins : 1 huge
  • Freshwater foot pump in head and galley
  • 1 seawater foot pump in galley
  • gas stove
  • Propane: 4 x 10kg. “Big Mama” fiberglass tanks (enough for 6-8 months cooking) with remote on/off solenoid. Stove top is a 4 burner “SMEG” on gimbals.
  • Freezer 
  • 1 pump-up shower in head, sun shower on deck
  • 1 manual toilet Lavac
  • Bilge pumpL whale Mk.5
  • Spare part for all pumps

Electricity

  • All wiring, fuses, breakers and breaker panel replaced in 2016.
  • House battery bank:  3 x 125Ah AGM batteries
  • Starting battery: 1 x 95Ah
  • Solar 2 x 250W modules, each with Blue Sky Solar Boost charge controller.
  • USB C chargeable reading lights (6)
  • Dimmable LED rope lights in saloon, overhead LED main lights (6).
  • Aims Power 600W (1200W surge) sine wave inverter
  • Iridium Satellite phone – can be use for calls with correct SIM card and for world wide GRIB forecasts with computer app and data only SIM.

Electronics and navigation instruments

  • Standard Horizon Matrix AIS/VHF
  • Furuno GP-32 GPS
  • B&G Triton2 wind/depth/speed/heading/gps instruments with chart table and cockpit displays
  • Icom IC-R75 communications receiver
  • Auto pilot : Tiller Mate auto-pilot
  • Windvane gear : Aries
  • Compass 
  • Epirb beacon

Dinghy

  • Achilles 4 person rigid bottom inflatable with sun cover. cabin top.
  • Outboard motor: Honda 5 HP 4 strokeSafety

Miscellaneous

  • Dodger with plexiglas wind shield.
  • Sun awning with funnels for rain water catchment
  • Main sail coverStaysail cover
  • Foredeck and saloon hatch covers
  • Windscoops for saloon and aft cabin hatches.

MAINTENANCE & CONSTRUCTION – KEY POINTS

Cold-moulded wood and epoxy construction: A multi-layer laminated wooden hull, with layers bonded in different grain directions for strength, stiffness and structural resistance.

Low-maintenance construction: Unlike traditional plank-on-frame wooden boats, this construction does not require regular caulking or splining of multiple plank seams.

Exterior paintwork: Two-part Awlgrip polyurethane coating.

Hull repainted twice since launch in 1988.

Last hull repaint in 2016.

Hull washed and treated twice yearly with Awlcare 73240 Protective Polymer Sealer.

Deck, gloss surfaces and non-skid areas last repainted approximately two years ago.

Demonstrated repairability: Following a significant impact amidships, a 30 × 30 cm area of the hull was repaired using replacement timber, epoxy bonding and internal reinforcement. The repair took approximately three days of part-time work and was completed while the yacht remained afloat.

Termite treatment: Following termite damage in the forward section during the COVID period:

 The entire vessel received professional termite treatment.

 Damaged wood was replaced where necessary using wood and epoxy.

 Other affected areas were treated by injection.

 Treatment completed in 2025, with a three-year warranty.

 

Exceptional Sailing Qualities

Beyond what photographs can convey, one of her most remarkable qualities is her exceptional sailing performance. Beautifully balanced in a wide range of conditions and under various sail configurations, she is remarkably easy to handle. Her balance is such that the Aries windvane steering system manages her effortlessly, to the extent that the wheel can be disengaged and she will tack and gybe under windvane control alone.

This outstanding balance and responsiveness under sail are among the qualities that truly set this wooden cutter apart.